Tyres are one of the most critical components of your vehicle, and if they're not being maintained properly, you could be at risk for dangerous blowouts.
Neglecting tyre care is obviously never a good choice because it results in a poor riding quality, reduced mileage, and compromised road safety.
However, tyre maintenance does not have to be a difficult or time-consuming process. Here are some suggestions, strategies, and everyday maintenance procedures for extending the life of your tyres and smoothing up your daily drive:
Check your tyre pressure every couple of weeks at a professional Workshop.
- To check the pressure, look at the side of your tyre, which will have a number on it, e.g. 185/65 R15 103H. This is the maximum combined inflation pressure in bar and kg/cm2 (the bar is equivalent to 100 kPa).
- When checking tyre pressures, ensure they are cold: i.e., not driven on for more than 20 minutes since driving or inflating them last time (if you go less than 20 minutes between each check, then there is no need to re-check).
If you're using a tyre pressure gauge, ensure it is inflated to the correct pressure before inflating your tyres. If you're using a manual pump, pump up each tyre until there are no longer any air leaks and then deflate each tyre slightly by turning the valve counter-clockwise just enough so that it stops leaking air.
Even Tyre Wear
Even tyre wear is essential for your car and tyres. Even tyre wear helps to maintain your safety, fuel efficiency and the overall condition of your tyres.
Even tyre wear helps to keep your tyres in good condition, which in turn helps you maintain safety. If one side of a tyre wears down faster than the other, it could lead to dangerous handling issues or an accident if a flat spot develops on one side due to uneven pressure distribution between both sides of the car's suspension system. In short: even tread wear ensures that your vehicle runs safely and efficiently!
So how can you tell if your tyres are wearing evenly? There are a few ways. The first is to check the tread depth. If one side of the tyre has less tread than the other, this could indicate uneven wear. You can also visually inspect your tyres for signs of uneven wear by looking for flat spots or bulges on each tyre's surface.
Look for Cuts and Bulges.
- Check for cuts and bulges. Cuts or bulges in the sidewall of a tyre are signs of damage to the tyre and may be caused by a puncture or blowout. Driving over sharp objects can also cause cuts and bulges, so it's essential to avoid going on rough roads if you can help it. Hitting a curb can also lead to a blowout, which is why you should always check your tyres before driving through an intersection!
If your tyre has a cut or bulge, it must be replaced immediately. You can't repair a puncture or blowout and continue driving on it, as this will cause further damage to your tyres and possibly cause an accident.
Rotate Your Tyres
The practice of rotating your tyres is an can extend the life of tyres. Rotating your tyres will help them wear more evenly, and you may see an increase in fuel efficiency.
To rotate your tyres, flip them every six months, depending on how many miles you drive and the weather conditions.
The tyres on the front of the car take more of a beating than those on the back, especially when making turns or braking. By rotating them, you ensure that all four tyres wear at about the same rate. One set will only have to be replaced after another set has worn out completely.
Have Your Alignment Checked When You Change the Tyres.
As well as ensuring your tyres are in good condition, it's also essential to check your vehicle's alignment when you change tyres.
A car's precise alignment can be thrown out of whack by an accident or similar incident and needs to reset. The cost of alignment checking is quite low as compared with the potential expense of damage caused by misaligned wheels.
In addition to having the alignment checked when you have new tyres fitted (or even before), it's a good idea to get it done at least once a year by a professional mechanic. This way, you'll avoid any unpleasant surprises about wear-and-tear on other parts of your vehicle that may need replacing or repairing before they reach their expected lifespan.
It's also worth remembering that the tyres are essential to your vehicle's suspension system. If they're not in good condition or if they're mismatched with each other, this can affect how well your car handles bumps and corners. Poorly tuned suspensions cause many accidents, and it's undoubtedly worth getting any repairs done before you embark on a long journey.
Check out our blog for more information on the warning signs that indicate your car may need new tyres: https://www.bcsworkshop.com.au/blog/post/signs-that-your-car-needs-new-tyres/
Make Sure Your Tyres are Performing Well.
You can check the pressure of your tyres with a gauge. A good tyre is inflated to between 32-34 psi (pounds per square inch). If not, you'll need to add or remove air from the tyres to reach that ideal pressure.
When checking for cuts and bulges, look at the sidewall of each tyre. Any reductions or bulges are indicators that there may be an issue with your tyre, so you should replace them immediately. Also, keep an eye out for any bumps on the surface of your treads—this could mean there's a hole in one of your treads that needs fixing before it becomes worse and more expensive to select than simply replacing all four tyres would have been!
Change Your Tyres Regularly
Changing your vehicle's tyres will ensure you get optimum performance over time and reduce wear on each tyre as they rotate through different roads and terrain while driving around town or country with each rotation cycle.
If you're unsure whether or not your vehicle needs new tyres, ask a mechanic for advice. They can tell if the tread is worn out and should then be replaced with new ones. It can also help when buying new tyres that they have been fitted by an expert who knows what they are doing—so make sure you know who has done this before making any purchases!
How BCS Workshop Professionals Helps you in Tyre Maintenances?
Selecting a trustworthy company for car service in Melbourne is crucial when it comes to repairing or replacing your tyres. It's important to choose a company that offers top-quality work at an affordable price.
BCS Workshop offers leading tyre brands at low prices daily, including Pirelli, Michelin, Bridgestone, Dunlop, Goodyear, Hankook, Kumho, and Winrun. Whether you drive a normal car, a performance car, a 4WD or an SUV, We’ve got your tyres in stock.
Wrapping up
Paying attention to these small details can make a big difference in extending the life of your tyres, avoiding expensive replacements, increasing your mileage, enhancing your driving experience, and, above all, ensuring your safety and that of others on the road.
If you're searching for Kia service near Melbourne or require assistance with any other car model such as Volkswagen, BMW, Honda, Renault, Mazda, and more, look at BCS Workshop.Contact us today for top-notch car tyre services in Chadstone and nearby areas.
Digiwhiz